Here’s How – Page 3

How-to: Wooden Fall Pumpkins

October 4, 2012 by Lacey Leave a Comment

We don’t claim to be crafty, but as promised here’s the tutorial from yesterday’s post…

Wooden Fall Pumpkins

Fall Crafts, Wooden Pumpkins, Pumpkin Crafts

When we say we don’t “claim to be crafty” we mean that we had to laugh out loud when we made a “materials” list. The fact that we even own a small pair of pliers actually makes us a bit giddy. Now, we will confess that we have hopes of being crafty, so why not start with old wood you can find along the roadside? And let’s face it, spray painting is a basic human gift right? (duct taping your shoes back together also qualifies as a basic human gift 🙂
These pumpkins are a super easy way to bring a little fall into your home. We’re using them everywhere. Bigger sets are great for front porches {paired with hay bales & dried corn stalks}or try smaller sets in your living room.

Materials (Laughing)

old wood + smaller branches for the pumpkin stems

we used log rounds & 2×2’s

sandpaper
orange spray paint
needle nose pliers
florist wire
wood glue

We decided to make a set of 3 pumpkins with a large, medium & small. We measured ours so that the smallest was 1/3 the size of the largest and the medium double the size of the smallest. Of course you can cut these by hand (argh) or you can find a neighbor with a nice big saw and trade cookies for cuts.

After the pieces are cut, sand down all surfaces. This removes most of the dirt from these old pieces of wood and smooths the surface for painting. For our square pumpkins, we sanded down all sharp edges as well as the corners a bit to give the wood a more rustic feel. This step also serves as a bit of an outline for the pumpkins, giving them dimension. Using an electric sander speeds things along, but regular sandpaper works just fine too… after all there are only so many plates of cookies to go around.

Spray paint the wood pieces on a sheet of newspaper. Remember to spray at a steady pace to avoid drips. The pumpkins might need one or two coats. Try to avoid a windy day or at least avoid spraying near other things that you do NOT want to be orange.

While the pumpkins are drying, make some curly-q pumpkin vines using pliers and the florist wire. Twisting the wire around a dowel or pencil makes for nice, tight, circular curls. Make sure to leave enough wire at the end so that it can be wrapped around the stem securely. (note the black paint on Lacey’s thumb? That is a clue that we tried a little something with black paint and we were craftily unsuccessful)

Using wood glue, attach a small branch to the top of the pumpkin. Be patient, the glue takes a few hours to dry completely. (for those of you who are slightly impatient go ahead and warm up the hot glue) After the stem is glued to the pumpkin and has dried completely, don’t be afraid to go over the edges and corners with a sander to expose the wood below. This will give the pumpkins a more rustic/antiquey feel. Attach your wire vines and voila–cute fall craft accomplished!

You just can’t go wrong with old wood and spray paint. Didn’t they turn out cute! Your turn.

How-To Floral Rings

September 24, 2012 by Lacey Leave a Comment

I teach high school. Its truly a fantastic set up. Honestly, with my landscaping degree completed last April I never imagined myself in a classroom ever again. But while in Spain this summer I saw an opening for floral design and couldn’t resist. So now I’m teaching every other day and free lance designing the rest of the time. High schoolers can be interesting, there’s no denying that.

The design activity we did today was so cute, I just couldnt help sharing. We made floral rings with button mums. Since mums are in season now that we’re in chilly September, grab a few from your garden and make a ring. They’ll keep for a day or two, especially if you refrigerate them when they arent being worn.

You’ll need:

1 foot or so of thick colored bullion wire + 2 feet of a smaller gauge wire for the decorative base
jewelry tools (small wire cutters & needle nose pliers)
a wooden dowel about the size of your finger
floral pins
button mums
Oasis floral adhesive

1) twist the end of the thick bullion wire into a spiral

2) Wrap the wire around a wooden dowel the size of your finger two or three times depending on your desired thickness.

3) Bring the wire back up to the top and twist the loose end into a spiral.

4) Take the thinner wire, and wrap it around two fingers so that it makes a loose oval.

5) Pinch the center of the oval, and wrap the tail of the wire around the center once or twice to secure. Fan out the loops on either side into a flower shape.

6) Attach the wire flowers to the ring using the tail wrapped around the center, making sure to keep the center as compact as possible.

7) Use Oasis Floral Adhesive to attach the button mum to the center of the wire flowers.

Making Your Own Topiary

August 13, 2012 by Lacey 1 Comment

Summer is in the early stages of its farewell. As gardens are offering their full bounty, pumpkins and gourds fatten on their vines, and summer blooms begin to fade. This is the time of year, after a summer full of coneflowers, daisies, and zinnias, that I ponder on how to add interest to a landscape that can become barren and stark in winter months. I drew inspiration from my summer in Europe, and specifically a wonderful day trip to the palace of Versailles, just outside of Paris.

Evergreens add year round structure to your landscape, and if implemented in a topiary form, will add additional interest. Topiaries can be purchased at any garden center, usually in varying sizes and shapes. As topiaries are more costly than their un-sculpted counterparts, creating your own can be extremely cost effective as well as fun.

1. Choose Your Plant

Its easy to start your topiary with a juvenile shrub. These are more simple because a smaller shrub can be molded as it grows. However a topiary can be accomplished with a grown & established plant as well.

If you have chosen to topiary a new shrub you might want to check out a topiary form. Wire forms can be purchased in a variety of shapes, everything from swans to giraffes, giving you the option for many unique topiaried forms to add interest in your garden. Although it might take a season or two for the plant to fill in the form, you will have a guide to fallow when pruning which makes keeping the shape much easier.

If your plant is established, adding a form might be difficult. Instead begin by clipping your shrub into a rough outline, then create your own guide out of thick wire. Topiary spirals, cones, and balls can easily be sculpted this way.

2. Training

The first thing to remember when it comes to homemade topiaries is that its a process, a slow {but gratifying} process.

Remember that when working with a growing shrub, no more than one inch should be pruned off in areas that need to be filled in. This pruning will encourage additional bushy growth.

For larger, more established shrubs three inches is the limit. More pruning than this will cause die back, and will ruin the topiary. By only taking three inches at a time, your sculpture will begin to take shape, and you wont have to worry about any burnt-looking, dry areas.

3. More Training & Pruning

Topiaries are never “finished”. A growing sculpture needs constant upkeep. If you have a finished product, or are still working on the training and shaping part, its the same: prune every 3 months.

Plant of the Week- Espalier Fruit Trees

August 7, 2012 by Lacey Leave a Comment

Are you jealous of all your friends’ delicious fruit harvests? Would you love a peach, apple, pear, apricot, or plum in your yard, but don’t think you have the space? Why not try one of my favorites, espalier fruit trees.

With horizontal branches, these trees can be planted up against walls or fences {providing they still get some good direct sunlight} and provide maximum delight with minimal space. Although you can prune and train your own young fruit tree, many espalier fruit trees are available at your local nursery, all shaped and ready to go. Many of these espaliered trees have multiple varieties grafted on to one tree. Six espalier branches = six different varieties!

Keep your tree growing in the right direction with the assistance of some stakes and heavy

gauge wire. Be sure to prune off any rogue shoots in early spring, the perfect job

for a pair of Felco pruners.

Moorish Style. . .put Moor into your garden

June 21, 2012 by Lacey Leave a Comment

I spent this past weekend traveling to Seville and Málaga. My husband and I visited the palace of Alcázar and the Alcazaba fortress. We srtolled through the high walled courtyards, listened to the trickling water in fountains and pools, inhaled the heavy purfume of jasmine, roses and orange blossoms while admiring the contrast between terra cotta pavers and brightly colored ceramic tiles.

In the eighth century the Moorish invasion of Spain introduced a style of garden design that would remain long after their rule had ended. Islamic and Persian gardens where among the first pleasure gardens in the world, creating a fragrant refuge from the desert. These gardens were very much like our own gardens today; places of sanctuary and escape.

It could be fun to incorporate elements of Moorish style into your garden, Here’s how!

Double the Delphiniums

June 19, 2012 by Lacey 1 Comment

Gorgeous spires of blossoms in pinks, purples, blues, and whites emerge in early summer bringing butterflies and hummingbirds with them. To encourage a repeat performance it’s essential to remove spent blossoms. Here’s how to to bring back your blossoms.

Remember to wear gloves when handling delphiniums since they contain alkaloids that can cause skin irritation. We absolutely love Atlas nitrile gloves. They are super slim, and perfect for light pruning. Plus they come in a bunch of fun colors!

Once blooms have faded, grab you Felco pruners and trim stalks about 3″ from the ground. Remove any damaged or yellowing leaves as well. To kick start a second round of color, apply a water soluble fertilizer weekly. Enjoy double the delphiniums!

Woman’s Work and Gloves

March 12, 2012 by Lacey Leave a Comment

The sun beckoned me to the yard today. Okay, let’s be honest…it wasn’t that tough of a job for the sun. Today I grabbed one of my favorite pair of work gloves and my hand pruners and I spend a good portion of the day offering a bit of life support to a few areas of the yard. First, let me say a few words about these gloves. Most importantly, they fit like a glove. 🙂
That being said, I love them because they are so soft and they move with my every movement and, being made of leather, they have given me good years of service. They are Womans Work gloves and you can find them online at www.womanswork.com. I can’t say enough how much I love these gloves.

Once I was all gloved up I took to the flower bed near the back of the house and starting cutting back the coneflowers. I am ashamed to admit that this things should have been done in the fall so I am tardy. My only excuse is that we were in football playoffs? Luckily coneflowers are not very temperamental which is one reason I love them in my garden. When cutting back a coneflower you should trim it all the way to the ground. No need to leave any of the woody stocks as the plant will send everything anew each spring.

All in all it was a good day in the yard. I find that having the right tools and a pair of gloves that I love always makes for a more enjoyable experience. I hope you are enjoying your Spring Cleaning as much as we are!

Welcome to All My Friends are Flowers

I’m Writing About……